Latest Fashion RC Maker Front Body Stablizer for Low Shock Touring Cars

Innovative new shock tower attachment that increases the bodies downforce transfer to your car, whilst also preventing bodyshell flex and roll, causing scrubbing in the wheel arches. 

With modern bodyshells being so low and thin, the downforce generated by the bodyshell isn’t effectively transferred to the car due to the flex of the body, especially in the front-mid section. Front Body Stabilizer transfers the downforce directly into the top of the front shocks, increasing your steering in corners, and stability on the straights.

As well as this, they prevent the body rolling onto the outside tire in cornering. Wheel arch rubbing is not good for your body, tires or corner speed! Front Body Stabilizer helps prevent the bodyshell rolling during cornering, by supporting it widely over the wheel arches.

The Front Body Stabilizers are adjustable in height, and can be further adjusted by adding foam on top of the platform. They fit all modern low profile shock touring cars (T4’20, BD10, IF14-2, R12, Mi7 etc), and are an optimised fit for the latest bodies from Xtreme, Zoo Racing, BittyDesign and Protoform.

It is recommended to use a 2mm longer than normal screw to mount the top of your shock due to the extra thickness of the Stabilizers. Tighten forcefully to ensure no pivoting or moving during crashes! 

Features: 

• Increases downforce transfer from the body to the car
• Increases stability of the car on straights and direction changes
• Increases corner speed due to reduced scrubbing in the wheel arches
• Super light 5mm Carbon Fiber construction
• Designed and Manufactured in Australia